Home > Exhibition > Content

Safety operation procedures of car washing machine installation method of computer washing machine

Safety procedures for car washing machine.

1. Before the machine is opened, it shall be confirmed:

(1) whether the running machine is in the initial position, whether the power switch indicator is on.

(2) the air pressure is normal, the pressure should be 3.0-4.0 KGF/c ㎡.

2. The conductor shall be cleaned and moved to the cleaning position.

3. Turn off the engine, pull the hand brake, close the window glass, and put in the antenna.

4. Confirm the decoration of the car body, and the installation of the reflector and wiper is in good condition to confirm whether there are scratches and paint damage on the car, and the user agrees.

5. When maintaining the machine, it should turn off the main power supply. It is strictly prohibited to use the wet hand touch control panel on the electrical switch, and the water is not allowed to be sprayed on the control panel, motor and other electrical components.

6. Clean the machine every day and check the oil level.

7. Complete maintenance of the car washing machine once a month including:

(1) check and replenish the lubricating oil, using 15w-40 gasoline engine oil, if the oil level is lower than normal,

Add oil to standard position.

(2) check whether the rolling fastening bolts and pins are solid and reliable.

What is the operation of the computer washing machine?

I'm sure you already know about the computer washing machine. Today we'll take you through the basic configuration of the computer washing machine.

Computer automatic washing machine is composed of photoelectric sensors, proximity switch, manual control switch control signal input part is controlled by programmable controller, the received signal, the output terminal connections include relays, electromagnetic valve actuator, etc.

Automatic computer washing machine encoder, transmitting module radio transmission part;Remote control of receiving receiver and control circuit.The equipment is flexible and easy to operate, so that the operator can still control the car wash and effectively improve the working efficiency when leaving the operation desk and computer washing machine.

Walking wheel brush device including a "concave" in the form of the main frame, main frame at the top of the beam, beam and connected to the drive shaft, drive shaft wheel brush connection rod transverse framework, in two link rod is equipped with guide wheel and the wheel interval, the beam at both ends with the left and right wheel brush device respectively.The left and right wheel brush not only can be his turn, left and right swing, but also can follow the conveyor track to clean, no suspension transport mechanism, greatly improve cleaning efficiency.

Our CARWASH  carwashing, based on computer car washer quality, credibility and development business philosophy, with first-class product quality and technical personnel and perfect after-sales service, welcome friends from all walks of life to visit, business negotiations.

2018031210463118466.jpg

Computer washing machine installation and operation.

The installation of the computer washing machine must be installed according to the installation drawings and instructions.

1. After the computer washing machine arrives at the receiving place, first check whether the number of parts is consistent and whether there is any damage.Timely inform relevant departments to find the cause and solve the problem in time.No problem can be installed according to the drawing.

2. After installation of the equipment, connect the three-phase AC380 and 50HZ power supply.The cutting area shall be greater than 6MM.

3. Inspection and test of the following items shall be carried out before the equipment is put into operation:

A. Check whether the accessory case is dry and clean.

B. Whether the operating mechanism of electrical components is flexible.There should be no lag or high operating pressure.The main electrical components are reliable, and the auxiliary contacts are reliable.Whether the control time is consistent with the requirements.

C. Check whether the rotating direction of the water pump and the mud scraper is correct.The reservoir level is in place.When everything is normal, it can be put into use.

4. Operation instructions of the computer washing machine accessories system.

A, the universal changeover switch SA is in the manual position, which can be operated separately, and the stop button is used to wash the car and scrape the mud.

B, the universal changeover switch SA is in the automatic position. As long as there is a car passing, the touch stroke switch SQ, the equipment will be automatically flushed and the mud work.

C, if there is any special situation, you can press the emergency stop button SB to stop working at any time.

D. The equipment is equipped with a water level control system. When the water level is below the set level, the system will stop automatically and report to the police.